Home > Riviste > Minerva Stomatologica > Fascicoli precedenti > Articles online first > Minerva Stomatologica 2019 Oct 15

ULTIMO FASCICOLO
 

JOURNAL TOOLS

eTOC
Per abbonarsi
Sottometti un articolo
Segnala alla tua biblioteca
 

ARTICLE TOOLS

Publication history
Estratti
Permessi
Per citare questo articolo

 

 

Minerva Stomatologica 2019 Oct 15

DOI: 10.23736/S0026-4970.19.04291-2

Copyright © 2019 EDIZIONI MINERVA MEDICA

lingua: Inglese

Evaluation of bond strength of dual resin cements to CAD/CAM-created lithium disilicate ceramic

Felipe SCZEPANSKI 1, Cláudia R. BRUNNQUELL 2, Sandrine B. BERGER 3, Eloisa A. PALOCO 3, Murilo B. LOPES 3, Amauri C. DRUMOND 3, Alejandra H. GONZÁLEZ 3, Ricardo D. GUIRALDO 3

1 Department of Dentistry, State University of North Parana, UENP, Jacarezinho, Brazil; 2 Department of Physiotherapy, State University of North Parana, UENP, Jacarezinho, Brazil; 3 Department of Restorative Dentistry, University of North Parana, UNOPAR, Londrina, Brazil


PDF


AIM: The objective was to examine the microshear bond strength values of different dual resin cements to computer-aided design (CAD)/computer-aided manufacturing (CAM)-created ceramics containing lithium disilicate, which underwent different surface treatments.
METHODS: Two dual resin cements (RelyX ARC and RelyX Ultimate) and three surface treatments of lithium disilicate ceramic blocks (Ceramic Primer (CP; containing silane) plus Adper Scotchbond Multipurpose (ASM) adhesive; CP plus Single Bond Universal (SBU) adhesive; and SBU adhesive alone) were tested. The SBU adhesive includes silane in its formulation. Each sample underwent a microshear test and bond strength values were subjected to analysis of variance (ANOVA) followed by Tukey's test (α = 0.05). Fracture patterns were also observed with light microscopy.
RESULTS: RelyX ARC treated with CP + ASM or CP + SBU presented resistance values that were significantly higher than the same treatments for RelyX Ultimate. Conversely, for the blocks treated with SBU alone, the mean resistance value for RelyX Ultimate was higher than that of RelyX ARC. Regarding the different types of treatment for each resin, the mean resistance value of RelyX ARC treated with CP + ASM was significantly highest, followed by treatment with CP + SBU and SBU treatment alone. Meanwhile, RelyX Ultimate treated with CP + ASM or CP + SBU presented resistance values that were significantly higher than SBU treatment alone. In all of the groups, an adhesive fracture pattern was predominantly observed.
CONCLUSIONS: The present results indicate that silanization is important for ASM and SBU adhesives to be effective.


KEY WORDS: Ceramics; Shear strength; Cementation

inizio pagina